Jammin Products is proud to introduce two new engines. A .21 and a .28 size engine. Jammin Jay himself did the R&D on these engines and paid special attention to the details that are so important for off-road R/C racing. Such as durability, ease of tuning, and driveabilty. Tweaks to the materials, crank timing, and tolerances all played a part in getting the engine to the high performance edge that Jammin Jay requires. Both engines deliver excellent bottom end power with great top end run out. Both include Turbo Plug type heads. While the .21 is tuned for the buggies, testing proved it to be more than capable in the truggy class. The .28 is all out big block performance but still very easy to drive and gets surprisingly good fuel mileage. Turbo Glow plug included. Made in Italy

.21 Jammin Engine = Part # 51250
.28 Jammin Engine = Part # 51251

After pushing Ho Bao over the last year, HoBao/OFNA are pleased to announce the impending release of their new Hyper ST Truggy. Designed specifically for Truggy competition, this new design is a welcome addition the OFNA's fantastic Truggy line of 1/8 products with Jammin X-1 CRT 28 RTR, Multilator 32 RTR and now Hyper ST 28 RTR.  With the release of the Hyper ST RTR in January 2007, a Pro Version will not be far a long.

Hyper ST RTR Pre-Painted Body	Full RTR Chassis with MacStar28 Engine

Sorry, but OFNA's Hyper ST page is not up as of yet.

Jammin Jay has been hard at work developing the next big thing in R/C. Actually it is a little thing. A smaller version of the Champion X1-CRT. The new CRT.5 truck is approximatly 1/12th size. The CRT.5 features 4WD front, center and rear steel gear diffs, chassis fits all standard case .12 engines for easier tuning and more power, Long suspension, mini size servos, wheels and tires are compatible with common electric 1/10th buggies.

CRT.5 shown with Chad Bradley Up-Grade wrap.	Side by Side shot of the full size CRT and the Mini CRT.5

 

WOW!  What is a DM-ONE?

With the coming release of the DM-One Pro-Touring Nitro Sedan 1/7th car, a new larger class of Pro Racing is now possible. Larger than the OFNA GTP kits, the DM-ONE has the look and feel of a more scale nitro racer. Based on the super strong X-1 transmission, the speed and performance will more than meet your racing expectations. The attention to pro level detail was overseen by Jeffrey Lin of JLRacing. Jeffrey pushed the design into a new era for OFNA with a class that we hope can be followed.  The Pro kits with three body choices should be available in Nov.

With the DM-ONE, size and speed does matter!

We now have three types of aluminium CNC clutch shoes available.  OFNA Blue, Purple & Silver CNC shoes are made of high grade alloy aluminium.

OFNA products are seen as major competition in Portugal with the Jammin designed X1-CR/FT winning the top 4 positions at Elva, Portugal.   Rodrigo Luis, pro X1-CR/FT driver under the HN brand, won the race as well as TQ.  The Hyper 8 Pro also was in the hunt; bring the total OFNA products to 7 out of 10 cars in the A-Main.

Pos/Driver	Buggy
1st   RODRIGO LUIS/TQ 2nd   RICARDO MAMEDE 3rd   PEDRO BACALHAU 4th   JOÃO GOMES 5      LUIS VIEIRA 6     CARLOS BORRALHO 7     JOÃO FERNANDES 8     FRANCISCO PAULINO 9     PEDRO TENDINHA 10   CARLOS ANDRADE	Jammin X1-CR/FT Jammin X1-CR/FT Jammin X1-CR/FT Jammin X1-CR/FT CL1 Hyper 8 Pro XB-8 7.5 Hyper 8 Pro Hyper 8 Pro

NOW IN-STOCK and SHIPPING

The Picco .8Tcc replaces the low power .05 Toki Japan OEM engine and coming SH .095 motor found in most small nitro kits like X-Ray, Chaos, Vulcan and Nitro Blade vehicles.  The engine comes with such features as Turbo ground Crankshaft, Bushing Rod, Slide Carb. and Turbo Plug head button. More info link  http://www.ofna.com/eng-picco-p0.htm 

This little power-house is truely fantastic, made like a minature Evo .12 Turbo, this engine is the greatest single performance increase you can purchase for your kit.  During our testing in a Chaos buggy, we found the engine to be easy to tune with a great idle.  As for the power, well... you just have to see for yourself!

#51118 Picco .8Tcc Pull Start	Picco Parts View

Here is the Press Release links for you to view.

http://nitrohouse.com/images/engine_pipes/picco/51118_picco08.pdf  http://nitrohouse.com/images/engine_pipes/picco/51118_picco08-2.pdf

WOW . . Great Pricing!

OFNA has just released a new line of Molded Foam Tire Inserts or Donuts for your buggy, truggy and monster tires.  These donuts are multi use foam and do not break down, so do not throw them away.  Cut them out of worn tires and use them over and over again.  The best part of this announcement is the pricing!  A set of 1/8 Buggy foams are $7.95 for 3 pairs or 6 pcs.  Yes, you are seeing right, 3 pairs per bag.  Try to compare with others, we can not be beat!

81096 Orange (Soft) Molded Foam Insert, 3 pairs . . . $7.95	81097 Yellow (Med) Molded Foam Insert, 3 pairs . . . $7.95

Part No.	Description	Retail
81096	Orange Soft Molded Foam Donuts, 1/8 Buggy 6 pcs. (3 Pairs)	$7.95
81097	Yellow Med. Molded Foam Donuts, 1/8 Buggy 6 pcs. (3 Pairs)	$7.95
81101	Orange Soft Molded Foam Donuts, 1/8 Truggy & Maxx 2 pcs. (1 Pair)	$7.95
81100	Yellow Med. Molded Foam Donuts, 1/8 Truggy & Maxx 2 pcs. (1 Pair)	$7.95
81103	Orange Soft Molded Foam Donuts, 40 Series Tires 2 pcs. (1 Pair)	$7.95
81102	Yellow Med. Molded Foam Donuts, 40 Series Tires 2 pcs. (1 Pair)	$7.95
81105	Orange Soft Molded Foam Donuts, 38 Series Tires 2 pcs. (1 Pair)	$7.95
81104	Yellow Med. Molded Foam Donuts, 38 Series Tires 2 pcs. (1 Pair)	$7.95

Sorry, I can't put 6 donuts in Truck foam bags, just too big!

OFNA and Ho Bao are making available four new pre-painted bodies for the Hyper 8 Pro.

Painting bodies is a pain, specially with RTR customers.  This is why OFNA has pushed Ho Bao to release pre-painted bodies prior to the Hyper 8 RTR release for Christmas.  Check with this announcement for the retail and part numbers in a few days.

#28178ORG	#28177GRN	#28180RTR	#28179PUR

New CNC Center Diff. mount for Jammin Buggy and Truggy. Design to improve your braking with patented off-axles brake cam and teflon bushings to minimize wear and maximize control.  The unit also comes with a graphite top plate. Units are in-stock now, part number for X1-CR #40610 or X1-CRT #40679.  Retail 149.95

X1-CR #40610	Features
	• CNC Alum. Parts • Split Center Mount • Off-Axles Brake Cam (patented) • Cam Bearings • Teflon Bushing • Graphite Top Plate

 

The OFNA Mutilator (OFNA #34318) is the newest addition to the Nitro Truggy world, due out in June. This RTR comes with a huge Force .32 - 3+ horse power engine and racing truggy tires and dish rims, giving this truggy the power and versatility you are looking for.  Retail $729.95 with Street est. $499.00.  Do not be fooled, this is a competition Truggy at a price to make your head turn! 

The Force .32 (OFNA #52208 @ $249.95 retail/ $175.00 street) engine is currently in stock for you to test for yourself.

See More views: http://www.ofna.com/mutilator.html

See Video: http://www.youtube.com/watch?v=d-L4N8Pqlgw&search=rc%20driver%20magazine

Jammin has released 3 new fuel tank Trigger in three colors.  These Triggers fit all OFNA tanks and is adjustable to buggy, truggy and sedan.

 

Part No.	Description	Retail
40620BK	Fuel Tank Trigger, Black	$4.95
40620BL	Fuel Tank Trigger, Blue	$4.95
40620R	Fuel Tank Trigger, Red	$4.95

After many months of testing, Jammin has released the JP-3 inline Hard Coated pipe to the world.  This new pipe is a 3-chamber design with all round performance, very simular to both JP-1 & JP-2 combined.  Made of thick aluminum which is then Hard Coated, the pipe features include Jammin signature CNC outlet, smooth flow manifold, and flexible pipe mount.  OFNA has this pipe currently in-stock under the part number #10051.  With the addition of JP-3 inline pipe to the JP-1 & JP-2 product line, the current market leader is now better!

JP-3 Pipe #10051	Features
	- Thick T6 Aluminum - Hard Coated protective treatment - CNC Signature protective outlet - High performance inline design - Smooth flow exhaust manifold - Flexible Wire Mounting

We now have three types of aluminium CNC clutch shoes available.  OFNA Blue, Purple & Silver CNC shoes are made of high grade alloy aluminium.

The new 1600 NiMH batteries packs are in stocks. These packs are offered in Flat or Hump (2 over 3) configurations. With an output of 1600Mh, look for longer run times and less re-charger during the day. These packs are used by the OFNA racing teams and a must use with high output servo's.

The OFNA Mutilator (OFNA #34318) is the newest addition to the Nitro Truggy world, due out in June. This RTR comes with a huge Force .32 - 3+ horse power engine and racing truggy tires and dish rims, giving this truggy the power and versatility you are looking for.  Sorry, the retail price will not be announced until June!

The Force .32 (OFNA #52208 @ $249.95 retail/ $175.00 street) engine is currently in stock for you to test for yourself.

See More views: http://www.ofna.com/mutilator.html

Send the competition packing with our newest Big Block Engine.. The Picco 28.
Ported for professional performance, and huge .28 displacement that gives you that aggressive low end punch and power. The Picco 28 Nitro Engine is engineered with the same great European quality the Picco brand is world-reknowned for.
Put a Picco Powerplant in, and get ready to win!

Learn more.

OFNA keeps taking it to the limit. The new Force .32 nitro engine will deliver all the horsepower you need to succeed, while maintaining the durability and affordability you've come to expect from the OFNA Force line of engines.

Learn more.

Start your nitro R/C engine effortlessly using our new Torque Start with powerful 550 motor. Insert the 6mm shaft with hexball tip into the new Torque-Slip design backplate receptacle to start your engine. New Torque Slip design prevents any premature damage to the engine's 1-way bearing.

* Backplate not included, make sure you purchase the proper backplate as well.

Learn more.