The new Billet 7075 Machined Shock Towers for the Jammin X2 Buggy are the lightest weight Aluminum Tower to date from the factory. These new pieces use the same geometry as the original equipment carbon fiber pieces supplied in the kit. Super strong and light weight. Hard coated.
FRONT
REAR
Billet X2 Buggy Front Tower - part # 41112
Billet X2 Buggy Rear Tower - part # 41113
New 1/8 Pro JL Racing clutch kit
After extensive off-road testing, OFNA is proud to announce the new JL Racing Clutch for 1/8 scale nitro products. This new clutch has full shoe surface contact to the clutch bell for consistent wear and better acceleration. New CNC alloy material clutch shoes and lightweight flywheel improves RPM response to your drive train. The kit contains shoes, flywheel, 1.1mm springs, two clutch nuts and collect. This kit is also a great option for 1/8 GTspec cars.
OFNA P/N #10107 - JLR Clutch Kit with Flywheel
OFNA P/N #10104 - 1.2mm Clutch Spring (option)
New Super Size Big Bore 17mm Shocks
OFNA finally announced to the world the arrival of optional 17mm super size big bore shocks. These CNC shocks are high quality with features like Hard Coated threaded bodies, 4mm shafts, shaft boots, and Extended steel cap mounts. At 17mm pistons these babies are big and ready to ride over the bump and jumps. Set to release in early Feb., these shocks will be in short supply.. so be first and order now. Also, these same shocks will fit all the Hyper 7 and 8 products as well as other manufacturers.
FRONT Pair #29112 retail $79.95; REAR Pair #29113 retail $79.95
Shocks sold as Front & Rear pairs
Shock Parts
New Cordless Soldering for OFNA
Here’s a tool that everyone will want in their toolbox; it’s an ARIES cordless, butane-powered soldering iron that’s distributed by OFNA. Because it’s butane-powered, you can use it on the road or at the track, and you don’t have to plug it into an AC outlet. Butane fuel is available at most supermarkets, smoke shops and hardware stores, so you’ll have no problems finding fuel for it, and it’s small size allows it to fit in even the most crowded toolbox. The soldering iron features a replaceable tip, an on/off switch, temperature control switch, and a child-proof switch, so the little ones won’t accidentally turn it on. It weighs only 78g, has an operating temperature of 450-degrees, and it holds enough fuel for 30 minutes of operation. It also has a built-in stand to keep the tip from burning your pit table or any surface it’s balanced on.
Cordless Multi-Function Soldering Iron – Item no. 90601; $33.95
New Multilator with Power Start Truggy - #34313
The OFNA Mutilator Power
Start RTR is the newest addition to the Nitro 1/8 Truggy
world. This RTR comes with an OFNA .28 engine and racing
spec's, 16mm big bore shocks, LPR tires and rims, and
now with C-hub suspension giving this truggy the power
and versatility you are looking for. Do not be fooled,
this is a competition Truggy at a price to make your
head turn!
OFNA
Multilator Power Start RTR
PART #34313- OFNA Racing .28 Engine
Jammin X2 RTR Truggy is Shipping
The new Jammin X2 Truggy-RTR upgraded with New Chassis Layout, New Engine Package, New Body and paint Scheme, Super Big Bore 16mm Shocks, and Top Loading Servo Saver. Jammin Products Ready to Rip kits include a 2 channel wheel type radio control system, Force .28 engine with Electric Shaft Starter, Painted and Trimmed body, Tuned Pipe, Premounted Jammin Tires, Glow Ignitor,& OFNA Rechargeable Receiver Battery Pack. Just add your fuel, fire it up, and let it rip!!!
OFNA releases the X-2 Buggy and is shipping!
With an already impressive racing pedigree which includes a pre-worlds victory for the X2 buggy and ROAR Truck national championship, Jammin release their eagerly awaited successors - the X2 buggy. "The new Jammin X2 Buggy upgraded with New Chassis Layout, Lightweight Drive Line Parts, Carbon Fiber Towers, Super Big Bore 16mm Shocks, Spiral Cut Low Friction Ring and Pinion Gears front and rear, Top Loading Servo Saver, and the Hi-Down Force Wing." OFNA P/N #34958; Retail $1195.95; Est.Street $775.95
Proline Revolver M2 tires
Lunsford Titanium Turnbuckle Set
New DM-1Spec is SHIPPING!
OFNA has raised the bar for the New DM-1Spec kit with Proline Body!
The DM-1Spec was designed to have just one thing on its mind.......racing! More specifically, it is designed for ROAR Race GTS class. Tightly based on the original 1/7th DM-1 Sedan the 1/8th DM-1Spec offers a number of changes, including a shorter wheelbase, that all help to give you an advantage over the competition. The addition of a clutch type 2-speed center diff provides blistering speeds for making short work of long straights. Also, the DM-1Spec is the first product to offer the New ProLine PF8-GT race body standard in the #34303 kit. When you get your hands on a DM-1 Spec you will know exactly why this car begs to be raced!
#34303 DM-1Spec Chassis with PF8-GT Body, 80% Assembled Retail $599.95 #34304 DM-1Spec RTR, Gray Body M-type .28Force/PS Retail $799.95
OFNA Dirt Pro, 80% is now shipping!
Pull the trigger on OFNA’s new 1/8th scale 4wd Dirt Oval Pro with Late Model Body!
Re-engineered from the ground up as an dirt oval racer, OFNA’s Dirt Pro is full of features which improve adjust ability and durability.Pull away from the competition using the traction and acceleration provided by the solid center spool and tough steel spur gear. Feel the balance provided by a special offset chassis and oval specific shock towers as you put the Dirt Pro sideways around every corner, throwing rooster-tails of dirt behind. Step into the high speed world of dirt oval racing with the only kit designed specifically for flinging dirt on the oval tracks! OFNA #34315 Retail $549.95
A new Forum Dirt Oval page has been opened--> Dirt Oval
New 1/8th Picco Off-road Buggy is in Stores!
Italian Power!
OFNA and Picco have teamed up again to create the 1/8th PICCO OFF-ROAD Buggy. The PICCO OFF-ROAD has unmistakable style, value and performance all wrapped up into one limited edition package.
A white on black theme carries on throughout the entire MBX Chassis. Black anodized aluminum contrasts with a white high down force rear wing, white dish wheels and white springs on the 16mm super big bore shocks. A special black cooling head resides on top of a 3-port Picco BAS engine completing the sinister look. You only find this kind of versatility, style and performance when industry powerhouses like OFNA and Picco get together on a project of this magnitude.
OFNA announces New foam insert profiles to fit ProLine tires
OFNA just added 4 new foam insert profiles to fit ProLine tires. These Molded Inserts are direct replacements for stock inserts found in PL and many other popular tires. Molded inserts change the relationship between the tire and track surface by increased traction and reduced side wall flex.
To top it off these molded Inserts will not deteriorate like regular foam donuts and are reusable.
Keeping up with the trend of less weight within the drive train and less overall weight of the newest racing buggies and truggies, Jammin Products felt it necessary to develop a clutch that would match these power to weight characteristics. The new Jammin Red Clutch shoes are lightened to increase throttle response and are machined from a special aluminum alloy to promote long wear. The edges are beveled to reduce the mushrooming effect and the clutch shoe set includes 1.0mm springs, 1.1mm springs, and shims. OFNA Part #40926 Retail = $29.95
Hyper 9 is off it's LEASH!
Team OFNA & HoBao's Jeremy Kortz was out testing the new Hyper 9 Pro for the first time yesterday. Jeremy was flying with the new buggy, which looked really good. Here is what he had to say after his first few hours with the buggy. "It jumps effortlessly. It feels light, and balanced. This is definitely what I have looked for. I know I'll go faster with the Hyper 9 Pro. Once I get some more time with set-up and get used to the car it will be really good.
With this great first run, the Team is planning to run the Hyper 9 Pro at the Nationals on June 4th and July 16th at the Pre-Worlds 2 in N.C.!
New 2.2 dish style colored wheels for CRT.5 in-stock
OFNA is now selling a newly designed colored 2.2 Dish wheels for the Jammin Truggy CRT.5 and other 12mm hex products. These new wheels have a more traditional design similar to the large 1/8 scale truggy brother. The wheels are sold in 4 pc (2 pair) bags at $14.95, see chart for color and part number.
86144 - White
86145 - Yellow
86146 - Orange
86147 - Black
Not Shown
New JL Tool from OFNA
JLR Tune Stop Tuning Screwdriver #10790 from OFNA. Now here’s a tuning screwdriver with a twist. It has an adjustable length, which means you can pull out the screwdriver tip to the length that you desire to suite your nitro car or truck’s body width – perfect for reaching that hard-to-reach low-end needle-valve.
The screwdriver tip can be collapsed to fit in tight toolbox trays, and your pocket! If that isn’t cool enough, it also has a CNC machined handle with a knurled grip and the JLR Racing logo printed on the side.
Now here’s the kicker; it has a rubber end cap that’s actually designed as an engine stopper. Just place the rubber end cap against you nitro vehicle’s Flywheel or exhaust tip and the engine stops immediately. Pretty trick!
New Color Added to OFNA's Pro Thick Wall Fuel Tubing!
OFNA/JLRacing released today a new light gray/black thick wall fuel tubing besides the already popular blue and yellow colors. This tubing is choosen over many others because of it's large center hole and thicker than normal outer wall. Even with this added thickness the Pure silicone tubing is very flexible and not easily pinched. The tubing comes 3 foot sections and retails for $1.95 Use what the Jammin Team and other Pro teams run, buy a bag and see for yourself!
Jammin Products is proud to announce the release of the new upgraded X1-CR-FTE, X1-RTR, X1-CRT-RTR and X1-CRT. All four kits now include the Super Big Bore Shocks and Springs. The four new kits are labeled the X1x Buggy, X1x-RTR Buggy, X1x Truggy and X1x-RTR Truggy. The four new kits will carry the same part numbers and have the same pricing. Just newer technology. All four kits are available now.
# 34959 = Jammin X1x Buggy
# 34963 = Jammin X1x Truggy
# 34961 = Jammin X1x-RTR Buggy
# 34962 = Jammin X1x-RTR Truggy
Jammin CRT .5 Mini RTR Is Shipping!
The long anticipated RTR version of the Jammin CRT.5 Mini is here. Now with standard Full size servos and new Jammin .12 Pull Start Engine and OFNA futaba Radio system. The CRT.5 RTR offers pro kit performance with RTR convenience with features like polished pipe, sealed diff, long arm suspenision and C-hub steering plus Up-Grade Graphic's decal designs in three color choices (red, blue & green). OFNA P/N# 34972 @ Retail $589.95
Jammin CRT.5 with Red Decals
New Jammin JP-4, 3-Chamber Pipes ready for 2008 Worlds
The Jammin JP-4 tuned
pipe is designed specifically for 1/8 off-road racing and it’s designed
to improve mid-range to top-end speed without sacrificing bottom-end
punch. Like the rest of the JP pipes, the JP-4 features a smash-proof
billet stinger and reliable spring coupler design. The JP-4 is IFMAR
legal, which means that you can race it at sanctioned events, and it’
available in two different coatings; hard-anodized or nickel plated
chrome. According to OFNA, the nickel plated finish is practically
impervious to stains. Both versions include 2 coupler grommets,
springs, setscrew and a spring-loaded pipe hanger.
OFNA is pleased to announce the New JLR Nitro Sedan Compact Starter Box. This new 1:10th box is specially designed by a racer for Racers. It accommodates two 7.2volt batteries packs with a M-4/550 motor for high torque and longer time between charges.
After extensive off-road testing, OFNA is proud to announce the new JL Racing Clutch for 1/8 scale nitro products. This new clutch has full shoe surface contact to the clutch bell for consistent wear and better acceleration. New CNC alloy material clutch shoes and lightweight flywheel improves RPM response to your drive train. The kit contains shoes, flywheel, 1.1mm springs, two clutch nuts and collect. This kit is also a great option for 1/8 GTspec cars. 
OFNA finally announced to the world the arrival of 
The OFNA Mutilator Power
Start RTR is the newest addition to the Nitro 1/8 Truggy
world. This RTR comes with an OFNA .28 engine and racing
spec's, 16mm big bore shocks, LPR tires and rims, and
now with C-hub suspension giving this truggy the power
and versatility you are looking for. Do not be fooled,
this is a competition Truggy at a price to make your
head turn!
The new Jammin X2 Truggy-RTR upgraded with New Chassis Layout, New Engine Package, New Body and paint Scheme, Super Big Bore 16mm Shocks, and Top Loading Servo Saver. Jammin Products Ready to Rip kits include a 2 channel wheel type radio control system, Force .28 engine with Electric Shaft Starter, Painted and Trimmed body, Tuned Pipe, Premounted Jammin Tires, Glow Ignitor,& OFNA Rechargeable Receiver Battery Pack. Just add your fuel, fire it up, and let it rip!!!
Team OFNA & HoBao's Jeremy Kortz was out testing the new 
JLR Tune Stop
